How to Install Quartz Clock Movement

Install your quartz clock movement by gathering tools, removing hands, replacing the old with the new movement securely. Reattach hands, test movement, and mount the clock back on the wall. Completing these steps carefully will ensure a successful installation. More tips for a professional installation experience await.

Gather Necessary Tools and Supplies

Gather all the tools and supplies needed for installing the Quartz Clock Movement. First, ensure you have a pair of needle-nose pliers, a screwdriver set, and a soft cloth to protect the clock face during the installation process. These tools will be essential for handling delicate components and securing the movement in place. Additionally, grab a new battery for the clock to ensure it runs smoothly once installed.

Next, locate the Quartz Clock Movement kit, which includes the movement mechanism, mounting hardware, and any necessary instructions. Make sure to have a clear workspace with ample lighting to aid in the installation process. Having a clutter-free area will help you stay organized and prevent any small parts from getting misplaced.

Check that the clock hands are also included in the kit before proceeding. If not, ensure you have the original clock hands to reattach once the new movement is installed. Having all the necessary parts ready before starting will save you time and prevent any interruptions during the installation.

Lastly, have a small container or tray nearby to hold any screws or small pieces removed during the process. This will help you keep track of all components and prevent them from rolling off the workspace. With all the tools and supplies gathered, you're now ready to move on to the next step of removing the clock hands.

Remove the Clock Hands

To remove the clock hands, carefully grasp the minute hand near its base and gently pull it straight off the clock shaft. The minute hand is typically the longer of the two hands and is positioned closer to the clock's center. Avoid pulling on the hands themselves as this can damage the clock movement. If the hands don't come off easily, you can use a hand puller tool specifically designed for this task. Once the minute hand is off, repeat the process with the hour hand, which is usually shorter and located further out on the clock face.

After removing the hour and minute hands, you may also need to detach a second hand if your clock has one. The second hand is usually the longest and thinnest hand on the clock. It also needs to be carefully pulled off the shaft. Be gentle to avoid bending or breaking the hand in the process.

Remember to handle the clock hands delicately as they're often fragile. Once all the hands are removed, you can proceed with taking out the old clock movement, which will involve accessing the back of the clock and locating the mounting hardware that secures the movement in place.

Take Out the Old Clock Movement

Are you ready to remove the old clock movement from your clock? Before beginning this process, ensure you have a clean, flat surface to work on and gather the necessary tools: pliers, screwdriver, and maybe a pair of gloves if needed.

Start by locating the access panel on the back of the clock. This panel is usually held in place by screws or tabs. Use your screwdriver or fingers to remove the screws or press the tabs to release the panel. Once the access panel is off, you'll have a clear view of the clock movement.

Next, locate the mounting hardware that holds the clock movement in place. Depending on the type of clock you have, this could be screws, brackets, or clips. Use your screwdriver or pliers to carefully remove these fasteners. Make sure to keep track of all the pieces you remove to make reassembly easier later on.

After removing the mounting hardware, gently slide out the old clock movement from its place. Be cautious not to force it or damage any surrounding components. Once the old movement is out, you're ready to proceed to the next step of installing the new quartz clock movement.

Install the New Quartz Movement

To properly install the new quartz movement, carefully align the movement with the mounting hardware in the clock. Ensure that the shaft of the movement is in the center hole of the clock face and that the mounting hardware lines up correctly with the holes on the movement. Once aligned, gently press the movement into place, making sure it sits securely and flush against the clock's back.

Next, secure the movement in place using the mounting hardware provided in the clock kit. Typically, this involves using small screws to attach the movement to the back of the clock face. Use a screwdriver to tighten the screws just enough to hold the movement firmly in place without over-tightening and risking damage.

After securing the movement, double-check that it's correctly aligned and firmly attached to the clock face. Give the movement a gentle twist to ensure it's seated properly and doesn't wobble. This step is crucial to prevent any issues with the clock's timekeeping accuracy once it's fully assembled.

With the new quartz movement securely installed, you're now ready to move on to the next step of reattaching the clock hands.

Reattach the Clock Hands

Carefully position the clock hands back onto the quartz movement, ensuring they align correctly with the designated markers. The hour hand should be first, followed by the minute hand, and finally the second hand if your clock has one. Look for any small screws or nuts on the clock hands; if they're present, secure them in place using a screwdriver or pliers. Make sure the hands aren't too loose or too tight on the shaft.

When placing the hands, be gentle to avoid bending them. The hour hand should fit snugly onto the shaft pointing to the correct hour marker. The minute hand goes on next, aligning it precisely with the minute markers. If there's a second hand, gently press it onto the pin in the center of the movement. Ensure that all hands have enough clearance from each other and the clock face to move freely.

Take care not to touch the hands too much, as the oils from your skin could cause damage over time. Once all the hands are in place, gently push them towards the clock face to ensure they're secure. Now that the hands are reattached, the next step is to test the clock movement to ensure everything is functioning correctly.

Test the Clock Movement

Ensure all clock hands are properly aligned and then proceed to assess the functionality of the clock movement. Before testing the movement, make sure the hour hand is pointing to the current hour and the minute hand is on the correct minute. If you have a second hand, ensure it's also properly aligned.

To test the clock movement, gently press the hour hand to advance the time. Observe if all the hands move smoothly without any obstructions. Check if the movement is silent or if there are any unusual noises. Next, move the minute hand and observe if the hour hand follows correctly. Test the accuracy of the movement by allowing the clock to run for several hours and comparing it to a reliable time source.

While testing, pay attention to any jerky movements or if the hands get stuck at any point. If you notice any issues, carefully take note of them for troubleshooting later. Additionally, ensure that the hands aren't touching each other or the clock face during the testing process.

After confirming that the clock movement is functioning correctly, you can proceed to mount the clock back on the wall. Testing the movement ensures that your clock will run smoothly and keep accurate time once it's back in its place.

Mount the Clock Back on the Wall

Position the clock securely against the wall at the desired location. Ensure that the mounting hardware aligns with the markings or holes on the wall. If you're using screws, drive them into the wall studs for optimal support. For drywall, consider using anchors to secure the screws firmly in place.

Once the clock is in position, make any necessary adjustments to ensure it hangs straight and level. Use a level tool to double-check the alignment. This step is crucial for the overall aesthetics and functionality of the clock.

After confirming the alignment, tighten any screws or mounting hardware to secure the clock firmly in place. Give the clock a gentle shake to test its stability. If it wobbles or feels loose, readjust the mounting to achieve a more secure fit.

Take a step back and admire your newly installed quartz clock. Ensure it's at the right height for easy time reading and complements the surrounding decor. A well-mounted clock not only serves its practical purpose but also enhances the overall look of the room.

Congratulations! You have successfully mounted your quartz clock back on the wall. Enjoy the functionality and aesthetic appeal it brings to your space.


You have successfully installed your new quartz clock movement! Enjoy your updated clock and its accurate timekeeping. Remember to test the movement periodically to ensure it continues to work properly.

Now that your clock is back on the wall, you can admire its new movement and continue to rely on it for keeping time in your home. Great job on completing this DIY project!

Leave a Reply

Your email address will not be published. Required fields are marked *

Free Worldwide shipping

On all orders

Easy 30 days returns

30 days money back guarantee

International Warranty

Offered in the country of usage

100% Secure Checkout

PayPal / MasterCard / Visa

Need Help?
United States (US) dollar